Home » Products » Corona Inspector | Multi-Sensor UAV Payload

Corona Inspector | Multi-Sensor UAV Payload

  • The ICI Corona Inspector and Corona Inspector Plus pair ICI’s brand-new solar-blind UV camera, the UV640, with the Sony R10C high-res visible camera.
  • This new UV camera clearly shows coronal discharge in direct sunlight with real-time gain control to ensure maximum sensitivity.
  • The high-res visible camera provides infrastructure assessment and identifies possible vegetation encroachment.
  • The Corona Inspector Plus includes the ICI 8640 LWIR Camera adding thermography capabilities where every pixel is also a non-contact thermometer.
  • This multi-sensor payload is the most versatile aerial inspection package available to the power distribution market.
  • Sample videos, images, and reports can be found below under “Sample Data”.

Request Quote

  • Ultra Low Power Consumption
  • High Stability
  • Fast Response
  • High Sensitivity
  • Smallest & Lightest Available
  • Pixel Resolution: 640×480
  • Spectral Band: 225nm to 285nm
  • Extreme Deep Optical Rejection: > 300 nm
  • Frame Rate: 30 Hz or Optional: 120 Hz
  • Dynamic Range: 14-bit
  • Operation Range: -40 °C to 80 °C
  • Storage Range: -40 °C to 70 °C
  • Pixel Operability: > 99 %
  • 75 G Shock / 4 G Vibration
  • Dimensions: 76 mm x 50 mm x 50 mm
    (H x W x D ± .5 mm)
  • Weight: 1397 g
  • USB 2.0 for Power & Data
  • USB, Parallel HD Video Out
  • Built in Shutter
  • Standard C-Mount Lens Mount
  • Operation Modes:
    • Follow Mode
    • Lock Mode
    • Built-in, independent IMU module
  • Temperature Sensor
  • Gremsy Specialized Gimbal Drive Motors with Encoders
  • USB Connection
  • Gremsy Advanced 32-Bit high performance ARM microprocessor
  • S-Bus/Spektrum/PPM Receiver Supported
  • Working Current:
    • Static current: 300 mA (@12 V)
    • Dynamic current: 600 mA (@12 V)
    • Locked motor current: Max 3.5 A (@12 V)
  • Operating Temperature: 5 °F ~ 120 °F (-15 °C ~ 50 °C)
  • Weight: 2.31 lbs (1050 g)
  • Gimbal Dimension: 236 mm x 179 mm x 288 mm (W x D x H)
  • Custom Camera Tray, using our own custom made cable harnesses
  • Camera Tray Dimensions:
    • Maximum depth from the center of gravity on camera base plate: 100 mm
    • Maximum height measured from top of camera base plate: 110 mm or 150 mm
    • Maximum width: 152 mm
  • Input Power: 12 V – 52 V
  • Powered USB hub
  • Connections:
    • Wifi
    • USB 2.0
    • CAN
    • UART
    • S-bus
    • Spektrum
    • PPM
  • PC Assistant Software Requirements:
    • Windows XP or above
    • Mac OS X 10.9 or above
  • Mobile Assistant Software Requirements:
    • iOS 7.1 or above
    • Android 4.3 or above
  • Maximum Payload: 3.7 lbs (1700 g)
  • Angular Vibration Range: ± 0.02°
  • Maximum Controlled Rotation Speed:
    • Pan axis: 200°/s
    • Tilt axis: 100°/s
    • Roll axis: 30°/s
  • Mechanical Endpoint Range:
    • Pan axis control: 360°
    • Tilt axis control: +270° to -150°
    • Roll axis control: ± 110°
  • Controlled Rotation Range:
    • Pan axis control: 360°
    • Tilt axis control: +90° to -135°
    • Roll axis control: ± 4


Corona Inspector | Request Quote Form

Company Name:

Person to Contact:

Email:

Package Type:

Message:

Additional information

Package Type

OGI Inspector, OGI Inspector Plus