Home » Products » TAU 2 RC-IF Remote Control Interface
TAU 2 RC-IF Remote Control Interface
- Control the FLIR TAU 2 and VUE remotely with “RC-IF” Remote Control Interface.
- 7 to 32 Volts DC Input
- Reverse Polarity Protection
- Image Capture
- Control w/FLIR TAU GUI
- Control w/RC Receiver
- S-Bus & PWM
- VPC Module Not Needed
- Compatible with the FLIR TAU 2 and FLIR VUE Thermal Imaging Cameras
Please see the Tau 2 to request a quote including this accessory.
- Control the FLIR TAU2 and VUE remotely with our TAU 2 RC-IF Remote Control Interface.
- Assign virtually any feature to the RC controller and change all camera options ‘on-the-fly’
- Continuous Digital Zoom
- Color Palette Selection
- FFC (NUC) Shutter Control
- Spot Meter / Temp Reading
- (DDE) Digital Detail Enhancement
- Thermal AGC
- Contrast & Brightness
- Capture Images to TAU2’s Memory
- 7 to 32 Volts DC Input
- Reverse Polarity Protection
- 16 Ch. S-Bus & 4 Ch. PWM
- Flip / Mirror Image
- RC-IF Setup and Calibration Software
- Size: 1.5″ x 1.5″ (38mm x 38mm) Square
- Weight: 14.5 Grams / 0.5 Ounces
- RC-IF MCX Video Cable Length:
- 10″
- 12″
- 16″
- 18″
- 20″
- 22″
- 24″
- 26″
- 28″
- 30″
- RC-IF J1 – 6″ Power / Video Flying Leads
- 6 Pin to Bare Ends (2 included)
- RC-IF MCX Connector:
- MCX to Bare Ends
- MCX (Right Angle) to MCX (Right Angle)
- MCX (Straight) to MCX (Straight)
- MCX (Right Angle) to MCX (Straight)
- MCX (Right Angle) to BNC (Male)
- MCX (Right Angle) to BNC (Female)
- MCX (Right Angle) to RCA (Male)
- MCX (Right Angle) to RCA (Female)
- MCX (Straight) to BNC (Male)
- MCX (Straight) to BNC (Female)
- MCX (Straight) to RCA (Male)
- MCX (Straight) to RCA (Female)
